April 2007 - macports-users - lists.macosforge.org

installing from binary
by Zoltán Nagy 26 Apr '07

26 Apr '07

Hello, I complied some ports on a PowerMac and I would like to reuse the binary packages on my PowerBook. I copied the binaries to the corresponding directory under /opt/local/ var and I tried port -b install tetex but something went wrong because I got error messages : cernvpn02-n028:~ root# port -b install tetex ---> Unpacking tgz archive for teTeX 3.0_4 Error: Target com.apple.unarchive returned: error copying "/opt/local/ var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dp orts_print_teTeX/work/destroot/+STATE": no such file or directory Error: Status 1 encountered during processing. How can I reuse the binary packages? Regards, Zoltan

1 1

mirror configuration?
by paul beard 26 Apr '07

26 Apr '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 For some reason, all my distfiles are coming from Lyon, France: seems a long way. I don't see any .conf or man page references to mirror configuration. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (Darwin) iD8DBQFGKSj1jE2ksZfa4ZURAi4YAKC3BRPo3hf2iixDkhuw+ok67CIsWQCeJiWU wY+R9aHLiAuoYUUHKRA/E3A= =hHOv -----END PGP SIGNATURE-----

3 5

Launching mysql5
by Thoraval Yvon 26 Apr '07

26 Apr '07

Hey all, if i launch mysql5 that way : $ sudo /opt/local/lib/mysql5/bin/mysqld_safe & i get : [1] 26609 ~%> Starting mysqld daemon with databases from /opt/local/var/db/mysql5 STOPPING server from pid file /opt/local/var/db/mysql5/www.une-bevue.fr.pid 070425 22:57:29 mysqld ended -----------------************ [1] + done sudo /opt/local/lib/mysql5/bin/mysqld_safe then the daemon is launched and ends afterwards. the file perms are : ~/Sites%> ls -al /opt/local/lib/mysql5/bin <snip /> -rwxr-xr-x 2 root admin 1226368 Apr 23 20:33 my_print_defaults is root:admin correct or does i have to create a group:owner mysql:mysql and change it accordingly ??? best, Yvon

2 5

apache2 activating php5
by Yvon Thoraval 26 Apr '07

26 Apr '07

Hey all, i've installed Apache2 by : $ sudo port install php5 +apache2 +mysql5 then, i did : stop Apple's default Apache ; chane firewall setup following <http://edu.ca.edu/article72.html> in particular,adding : <http://edu.ca.edu/IMG/png/coupe-feu-nouveau.png> cp httpd.conf-sample to httpd.conf edit it to my needs including : AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps into <IfModule mime_module> did a : $ sudo /opt/local/apache2/bin/apxs -a -e -n "php5" libphp5.so;sudo cp /opt/local/etc/php.ini-dist /opt/local/etc/php.ini resulting in : [activating module `php5' in /opt/local/apache2/conf/httpd.conf] and finally : sudo launchctl load -w /Library/LaunchDaemons/org.macports.apache2.plist NOW, Apache2 is working well fot html and xhtml pages HOWEVER, when pointing a browser to : <http://www.une-bevue.fr/PHP/info.php> the browser (either firefox or webkit) asks me what i want to do with this file either Open it with an Application or Save it somewhere. I think i've missed something here but what ??? best, Yvon

4 7

checksum mismatch for pkgconfig
by Bakki Kudva 26 Apr '07

26 Apr '07

Hi, When I try to install pkgconfig I get...---> Verifying checksum(s) for pkgconfig Error: Checksum (md5) mismatch for pkg-config-0.21.tar.gz Error: Checksum (sha1) mismatch for pkg-config-0.21.tar.gz Error: Checksum (rmd160) mismatch for pkg-config-0.21.tar.gz Error: Target com.apple.checksum returned: Unable to verify file checksums Error: Status 1 encountered during processing. Has any one seen this? I posted earlier on this, I am wondering if the post got through since it had an attachment. (7k plain text) Thanks, bakki

2 1

sharing port files
by Zoltán Nagy 26 Apr '07

26 Apr '07

Hi, I have some port file and I set up a repository which is available via http protocol. (http://cern.ch/nagyz/macports) I added to the sources.conf the following line: http://cern.ch/nagyz/macports/ The synchronization works fine but when I try to install something I get the following message: $ sudo port -d install nlojet++ DEBUG: Found port in http://cern.ch/nagyz/macports//science/nlojet++ DEBUG: Port extract failed: gzip: stdin: not in gzip format tar: Child returned status 1 tar: Error exit delayed from previous errors while executing "darwinports::fetch_port $url" ("^https?$|^ftp$" arm line 2) invoked from within "switch -regexp -- ${protocol} { {^file$} { return $string } {^dports$} { return [darwinports::index::fetch_port $url $destdir] } ..." (procedure "darwinports::getportdir" line 3) invoked from within "darwinports::getportdir $porturl $portdir" (procedure "dportopen" line 26) invoked from within "dportopen $porturl [array get options] [array get variations]" Error: Unable to open port: Port extract failed: gzip: stdin: not in gzip format tar: Child returned status 1 tar: Error exit delayed from previous errors If I set up a local repository then everything is OK. Is it possible to use http:// in the sources.conf file? Best wishes, Zoltan

3 3

Re: Update of libidn for MacPorts
by Olaf Foellinger 26 Apr '07

26 Apr '07

Hi, * Boey Maun Suang <boeyms(a)macports.org> [18.04.07 06:40]wrote: > Let's include the link to the ticket this time. > > [1] http://trac.macports.org/projects/macports/ticket/11702 > > On 18/04/2007, at 14:37, Boey Maun Suang wrote: > > >Hi Olaf, > > > >I just wanted to ask whether or not you'd had a chance to look at > >the update ticket that I submitted for libidn [1], which lists you > >as its maintainer. It's been a couple of weeks since I submitted > >it, and I'd like to apply if you haven't any objections. Maun Suang has submitted a patch for libidn to bump it to version 0.6.9. It works at least for me. Please submit this patch and note his contribution in the Portfile. Gruss Olaf

2 1

conflict in p5-dbd-mysql?
by paul beard 26 Apr '07

26 Apr '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I was hoping to explain how well MacPorts would work for a MySQL installation, specifically with the perl DBD libs. Ooops . . . tichy:~ root# port install p5-DBD-mysql - ---> Staging p5-dbd-mysql into destroot - ---> Installing p5-dbd-mysql 3.0008_0 - ---> Activating p5-dbd-mysql 3.0008_0 Error: Target com.apple.activate returned: Image error: /opt/local/ lib/perl5/vendor_perl/5.8.8/darwin-2level/DBD/mysql/GetInfo.pm already exists and does not belong to a registered port. Unable to activate port p5-dbd-mysql. Error: Status 1 encountered during processing. tichy:~ root# port provides /opt/local/lib/perl5/vendor_perl/5.8.8/ darwin-2level/DBD/mysql/GetInfo.pm /opt/local/lib/perl5/vendor_perl/5.8.8/darwin-2level/DBD/mysql/ GetInfo.pm is provided by: p5-dbd-mysql tichy:~ root# what's up with that? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (Darwin) iD8DBQFGMB01jE2ksZfa4ZURAtwhAKCvoRhSYjNHRwtgUYb9+IsZ6kpiGQCfZrgO uZXgPuSAbRe53ZZNNhbbMsE= =yxUg -----END PGP SIGNATURE-----

1 0

Gnucash fails to install: configure dbus-glib failure
by Bjorn Berg 26 Apr '07

26 Apr '07

Sorry, first post was in html. Here's the trace in plain text (I hope!) Any suggestions? Bj IBook:~ bj$ sudo port install gnucash ---> Configuring dbus-glib Error: Target com.apple.configure returned: configure failure: shell command " cd "/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_devel_dbus-glib/work/dbus-glib-0.73" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --enable-tests " returned error 1 Command output: checking for sys/uio.h... yes checking for writev... yes checking for ISO C99 varargs macros in C... yes checking for GNUC varargs macros... yes checking for struct cmsgcred... no checking for getpeerucred... yes checking for getpeereid... yes checking abstract socket namespace... no checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... yes checking for dgettext in libc... yes checking for bind_textdomain_codeset... yes checking for msgfmt... /opt/local/bin/msgfmt checking for dcgettext... yes checking for gmsgfmt... /opt/local/bin/msgfmt checking for xgettext... /opt/local/bin/xgettext ./configure: line 27823: ./po/POTFILES.in: No such file or directory checking for XML_ParserCreate_MM in -lexpat... yes checking expat.h usability... yes checking expat.h presence... yes checking for expat.h... yes checking for pkg-config... /opt/local/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for DBUS... configure: error: DBus development libraries not found Error: The following dependencies failed to build: libgtkhtml312 dbus-glib p5-finance-quote p5-crypt-ssleay p5-libwww-perl p5-compress-zlib p5-compress-raw-zlib p5-io-compress-base p5-io-compress-zlib p5-html-parser p5-html-tagset p5-uri p5-datemanip p5-html-tableextract Error: Status 1 encountered during processing.

6 17

PortAuthority 2.0 now available
by Kevin Walzer 24 Apr '07

24 Apr '07

PortAuthority 2.0, the GUI for MacPorts, is now available. PortAuthority aims to bring the power of MacPorts to the traditional Mac user by providing a user-friendly graphical interface to MacPorts. Using a familiar combination of windows, icons, and menus, PortAuthority users can search, install, update, and remove MacPorts programs and the MacPorts infrastructure itself. Version 2.0 includes the following improvements: * A significantly redesigned interface for greater ease-of-use. * Browse categories with tree display. * Keeps history of search terms. * Bug fix: Keyboard shortcuts streamlined. PortAuthority is shareware; licenses are available for $20 and a 30-day demo is available. Version 2.0 is a free upgrade for registered users. PortAuthority is a universal binary and requires Mac OS X 10.4. For more information, visit http://www.codebykevin.com/portauthority.html. -- Kevin Walzer Code by Kevin http://www.codebykevin.com

1 0