July 2007 - macports-users - lists.macosforge.org

Information needed to fix build problem
by Marv Abe 19 Jul '07

19 Jul '07

Anyone - I have a problem re-building only the clamav package after aborting the package fetching and manually attempting to cleanup after my snafu. Seems that I really messed up by only doing a partial cleanup. I have MacPorts 1.5. If anyone can point me to some hints or documents on what to look for in my build system to right myself, it would be appreciated. Here's where I am at: ddb029:/opt/local/var/db/dports/build # port -d install clamav DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysu tils/clamav DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/cl amav DEBUG: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/c lamav": no such file or directory while executing "cd $portpath" (procedure "mportopen" line 28) invoked from within "mportopen $porturl [array get options] [array get variations]" Error: Unable to open port: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/c lamav": no such file or directory Thanks in advance for any hints. Marv

2 1

GTKsourceview# does not recognize gnome-sharp
by olivier SAINT-EVE 19 Jul '07

19 Jul '07

Hello, I do not know if I sent a message similar to this one, but I absolutely need help! Indeed, I try to install (for mono & monodevelop) GTKsourceview# which does not recognize gnome#; the error message is: checking for GTK_SHARP... configure: error: Package requirements (gnome-sharp-2.0 >= 1.9.3) were not met: No package 'gnome-sharp-2.0' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GTK_SHARP_CFLAGS and GTK_SHARP_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. the versions are 2.0-0.11 for gtksourceview# and 2.16 for gnome-sharp. I have modified the variable PKG_CONFIG_PATH, which value is /opt/local/bin/mcs, but without any success. Can somebody help me? thank you, lolveley.

2 4

Can't compile/Make 1.5.0 on a MacBook (was Re: MacPorts 1.5.0 released)
by TjL 19 Jul '07

19 Jul '07

(reposting... I sent this 5 days ago but no replies) On Jul 10, 2007, at 2:54 AM, Juan Manuel Palacios wrote: > I am glad to announce that we've finally finished the 1.5.0 > edition of MacPorts, readily available through all our regular > distribution means: > > -) binary installer for both 10.4 (Universal) and 10.3, http:// > svn.macports.org/repository/macports/downloads/MacPorts-1.5.0/ > -) source tarballs, both gz and bz2 formats, same location as above; > -) selfupdate. > Using http://svn.macosforge.org/repository/macports/downloads/ MacPorts-1.5.0/MacPorts-1.5.0.tar.bz2 which I downloaded and unarchived. $ ./configure && make checking build system type... configure: error: /bin/sh ./config.sub - apple-darwin8.10.1 failed configure: WARNING: Cache variable ac_cv_build contains a newline. zsh: 10685 exit 1 ./configure Running 10.4.10 on a MacBook 2Ghz Core Duo

5 9

Zope-btreefolder2
by Fred Brunner 19 Jul '07

19 Jul '07

Running into a strange problem trying to install Plone via macports. The zope and zope-btreefolder2 ports seem to have some strange circular dependency. Whenever I try to activate the btreefolder2 install, I get: "Error: port activate failed: Image error: /opt/local/libexec/Zope/lib/python/Products/BTreeFolder2/__init__.py is being used by the active zope port. Please deactivate this port first, or use the -f flag to force the activation." I tried clean --all on both ports, but I keep getting this error. I can use the -f force option, but it reports a long list of files overwritten besides that one. Anybody see this before? Thanks.... --fb

1 0

Re: gnucash upgrade installs but fails to work
by Marc André Selig 19 Jul '07

19 Jul '07

(Please remember to cc the list on all replies.) On 7/19/07, McGarry Vince <vmcgarry(a)austin.rr.com> wrote: > It compiled with guile16 which, as you stated, is the default. I > tried removing guile and slib-guile. g-wrap was not installed. I had > guile16 and g-wrap16 already installed. After cleaning everything I > attempted to install and got: > > configure: WARNING: Can not find Guile on this system > checking for guile... no > checking for guile - 1.6.0 <= version < 99.99.99... no: > configure: WARNING: guile version check failed > configure: error: If you had installed guile and slib-guile after already having installed guile16 and slib-guile16, things may have gotten mixed up. I'd suggest uninstalling guile, guile16, slib-guile, slib-guile16, g-wrap, g-wrap16. Deactivate any previous version of gnucash. Then try installing anew (with +guile16), and it should pull in the required dependencies in the correct order. (I don't know if macports 1.5 has learned to activate inactive but installed dependencies? If so, deactivating the guile stuff instead of uninstalling would also work and would be quite a bit faster. On 1.4, it would break things.) Regards, Marc

1 0

dictd server
by simon g 19 Jul '07

19 Jul '07

hello, i was, wondering is the dictd server available so that i may use dictionary databases locally, do i need the server or is the client and databases sufficient. if i need to install the server, which doesnt seem to be available in the ports, can i just compile it. how would i edit the files to make it part of my ports collection, as i want to keep track of my source installs using ports. feel free to edit the grammar if you need to make this post more readable. thanks, simon

1 0

roll back gnucash
by Kastus Shchuka 19 Jul '07

19 Jul '07

Hi, I just upgraded gnucash to 2.2.0 and after playing with it for some time realized that it is not really usable. It starts much slower than 2.0.5, report generation takes forever, and moreover, there is no graphics in the report. Is it possible to revert back to version 2.0.5? I tried deactivating gnucash using `port deactivate gnucash` and then installing old version but it reinstalls version 2.2.0: sudo port install gnucash @2.0.5_2 ---> Unpacking tgz archive for gnucash 2.2.0_0+guile16 ---> Activating gnucash 2.2.0_0+guile16 ---> Cleaning gnucash I also tried this command: sudo port activate gnucash @2.0.5 ---> Activating gnucash 2.0.5 Error: port activate failed: Registry error: gnucash 2.0.5 not registered as installed. What am I doing wrong? Or is it not possible to install old version 2.0.5 of gnucash with MacPorts? Thanks, -Kastus

3 3

(no subject)
by LD 19 Jul '07

19 Jul '07

MP 1.5.0, Mac OS 10.4.10 PPC # port upgrade -d py-scientific ---> Fetching py-scientific ---> Verifying checksum(s) for py-scientific ---> Extracting py-scientific ---> Configuring py-scientific ---> Building py-scientific with target build Error: Target org.macports.build returned: shell command " cd "/opt/ local/var/macports/build/ _opt_local_var_macports_sources_rsync.macports.org_release_ports_python_ py-scientific/work/ScientificPython-2.6" && /opt/local/bin/python2.4 setup.py build " returned error 1 Command output: Src/Scientific_netcdf.c:1949: error: 'i' undeclared (first use in this function) Src/Scientific_netcdf.c: At top level: Src/Scientific_netcdf.c:1959: error: parse error before 'Py_ssize_t' Src/Scientific_netcdf.c:1961: warning: function declaration isn't a prototype Src/Scientific_netcdf.c: In function 'PyNetCDFVariableObject_ass_slice': Src/Scientific_netcdf.c:1963: error: 'value' undeclared (first use in this function) Src/Scientific_netcdf.c:1967: error: 'self' undeclared (first use in this function) Src/Scientific_netcdf.c:1971: error: 'low' undeclared (first use in this function) Src/Scientific_netcdf.c:1975: error: 'high' undeclared (first use in this function) Src/Scientific_netcdf.c: In function 'PyNetCDFVariableObject_ass_subscript': Src/Scientific_netcdf.c:2016: error: 'Py_ssize_t' undeclared (first use in this function) Src/Scientific_netcdf.c:2016: error: parse error before 'len_dim' Src/Scientific_netcdf.c:2017: error: 'len_dim' undeclared (first use in this function) Src/Scientific_netcdf.c:2026: error: parse error before 'i' Src/Scientific_netcdf.c: At top level: Src/Scientific_netcdf.c:2074: error: parse error before 'Py_ssize_t' Src/Scientific_netcdf.c:2075: warning: function declaration isn't a prototype Src/Scientific_netcdf.c:2082: error: 'lenfunc' undeclared here (not in a function) Src/Scientific_netcdf.c:2082: error: parse error before 'PyNetCDFVariableObject_length' Src/Scientific_netcdf.c:2084: error: 'ssizeargfunc' undeclared here (not in a function) Src/Scientific_netcdf.c:2084: error: parse error before 'PyNetCDFVariableObject_error2' Src/Scientific_netcdf.c:2085: error: parse error before 'PyNetCDFVariableObject_item' Src/Scientific_netcdf.c:2086: error: 'ssizessizeargfunc' undeclared here (not in a function) Src/Scientific_netcdf.c:2086: error: parse error before 'PyNetCDFVariableObject_slice' Src/Scientific_netcdf.c:2087: error: 'ssizeobjargproc' undeclared here (not in a function) Src/Scientific_netcdf.c:2087: error: parse error before 'PyNetCDFVariableObject_ass_item' Src/Scientific_netcdf.c:2088: error: 'ssizessizeobjargproc' undeclared here (not in a function) Src/Scientific_netcdf.c:2088: error: parse error before 'PyNetCDFVariableObject_ass_slice' Src/Scientific_netcdf.c:2092: error: parse error before 'PyNetCDFVariableObject_length' error: command '/usr/bin/gcc-4.0' failed with exit status 1

2 1

gnucash upgrade installs but fails to work
by McGarry Vince 19 Jul '07

19 Jul '07

Here is my log file. The installation goes smoothly, but something doesn't work. Any insights? Vince McGarry ===== Wednesday, July 18, 2007 5:55:28 PM US/Central ===== gnc.bin-Message: main: binreloc relocation support was disabled at configure time. Backtrace: In unknown file: ?: 0* [primitive-load-path "c-interface.scm"] In /opt/local/share/gnucash/scm/c-interface.scm: 21: 1* [require hash-table] In unknown file: ?: 2 (cond ((not feature) (set! *catalog* #f)) ((slib:provided? feature)) ...) ?: 3 (let* ((path #)) (cond (# #) (# # #) (# # #) ...)) ?: 4* [catalog:get hash-table] ?: 5* (if (not *catalog*) (let* ((slibcat #)) (cond (# # #)) ...)) ?: 6 (let* ((slibcat #)) (cond (# # #)) (cond (slibcat #)) ...) ?: 7 (set! *catalog* (append (catalog:try-read # "usercat") *catalog*)) ?: 8* [append ... ?: 9* [catalog:try-read ... ?: 10* (user-vicinity) <unnamed port>: In expression (user-vicinity): <unnamed port>: Unbound variable: user-vicinity

2 1

After binding server to directory service lighttpd and mongrel won't start
by Sterling Anderson 19 Jul '07

19 Jul '07

I needed to bind my server to our organization's Active Directory domain today and after that now LightTPD and Mongrel refuse to start on reboot. I can unload, then load the LaunchDaemons for each item and things are fine, but obviously I'd rather not have to do that every time I reboot the server. I had the exact same issue last month with just LightTPD, you can see the thread here: http://lists.macosforge.org/pipermail/macports-users/2007-June/ 004009.html Now that I've added the AD to the mix I'm wondering if there is something I can try different. Any suggestions? -- Sterling Anderson http://sterlinganderson.net/ sterling_anderson[at]mac.com 608.239.8387

2 1