July 2007 - macports-users - lists.macosforge.org

gtksourceview-sharp does not recognize gnome-sharp
by olivier SAINT-EVE 20 Jul '07

20 Jul '07

hello, I would be great to tell me if the port gnome-bindings-csharp is involved in the compilation of gnome-sharp. Indeed, I try to install gnome-sharp but I obtain the result: --- Configuration summary * Installation prefix = /opt/local * C# compiler: /opt/local/bin/mcs -define:GTK_SHARP_2_6 -define:GTK_SHARP_2_8 -define:GNOME_SHARP_2_16 Optional assemblies included in the build: * art-sharp.dll: yes * gnomevfs-sharp.dll: yes * gnome-sharp.dll: no * rsvg-sharp.dll: no * gtkhtml-sharp.dll: no * vte-sharp.dll: no NOTE: if any of the above say 'no' you may install the corresponding development packages for them, rerun autogen.sh to include them in the build. --- I do not know how to include the library gnome-sharp.dll. Is the port gnome-bindings-csharp involved? lolveley.

1 0

gtksourceview# does not recognize gnome#
by olivier SAINT-EVE 20 Jul '07

20 Jul '07

Hello, here is my problem: I want to install monodevelop, and to do this I have to install gtksourceview#. But this last one does not recognize gnome#: checking for GTK_SHARP... configure: error: Package requirements (gnome-sharp-2.0 >= 1.9.3) were not met: No package 'gnome-sharp-2.0' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GTK_SHARP_CFLAGS and GTK_SHARP_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. so I reinstalled gnome-sharp and after having entered "./configure" I have the following message: --- Configuration summary * Installation prefix = /opt/local * C# compiler: /opt/local/bin/mcs -define:GTK_SHARP_2_6 -define:GTK_SHARP_2_8 -define:GNOME_SHARP_2_16 Optional assemblies included in the build: * art-sharp.dll: yes * gnomevfs-sharp.dll: yes * gnome-sharp.dll: no * rsvg-sharp.dll: no * gtkhtml-sharp.dll: no * vte-sharp.dll: no NOTE: if any of the above say 'no' you may install the corresponding development packages for them, rerun autogen.sh to include them in the build. --- so we can see that gnome-sharp is not installed.(what is confirmed if I go to /opt/local/lib/pkgconfig, where there is no gnome-sharp-2.0.pc file). Do you know how I can install this dll?Is there an option of the "configure" command I didn't used? lolveley.

2 7

Re: Information needed to fix build problem
by Ryan Schmidt 20 Jul '07

20 Jul '07

On Jul 19, 2007, at 17:13, Marv Abe wrote: >> If you still get the same error... Since it says the directory "/opt/ >> local/var/macports/sources/rsync.macports.org/release/ports/sysutils/ >> clamav" does not exist, how much of that path does exist? > > /opt/local/var/macports/sources/rsync.macports.org/release/ports/ > sysutils/ > exists > > There is some configuration or state file somewhere in the MacPorts > tree/system/configuration that apparently says that "/opt/ > local/var/macports/sources/rsync.macports.org/release/ports/sysutils/ > clamav" should exist. That's the key I'm looking for. The file > system does > not have any "clamav" except in the /opt/local/etc directory that > holds > clamav's execution configuration files. > > > Clamav has built on this system for quite a long time until my > snafu of > terminating the fetch and attempts at manual cleanup. It looks like /opt/local/var/macports/sources/rsync.macports.org/ release is your ports tree. My guess is that after you had initial problems installing you tried to clean up manually by removing everything called "clamav" including the directory in your ports tree. That should not have been done and is probably what confused MacPorts. The PortIndex still knew about the existence of that directory, so when you later asked MacPorts to install clamav again, it consulted its PortIndex, confirmed that a port called clamav should exist, and proceeded to look for the portfile in the sysutils/ clamav directory, and barfed when that didn't exist. On Jul 20, 2007, at 09:42, Marv Abe wrote: > I think the key to fixing my problem was to use the "-f" with clean. > Last night after rebooting, I started: > port -f sync > port -df clean --all clamav > > This AM, I found that the clean did not gripe about clamav's > directory not > being found, nor did it gripe about clamav not being installed and > clean > appears to have completed as I would have expected. > > I had some problems fetching, but I think it was related to our > proxy server > at work getting in the way. After a bit of reconfiguring my NIC, I > was able > to successfully install clamav. The sync will therefore have been what fixed it, because the sync would have compared your local ports tree with the remote master tree and downloaded any necessary changes. This would have included replacing the missing clamav port directory.

1 0

uninstall unneeded dependencies
by Jonathan Stickel 20 Jul '07

20 Jul '07

How do I uninstall unneeded dependencies? Thanks, Jonathan

1 0

Macports dependency build (Suggestion)
by Keith J. Schultz 20 Jul '07

20 Jul '07

Hi All, I have noticed that port goes through the dependency list sequentially, and build accordingly. This is actually O.K., but it would be nice I the ports with the most "dependants" first. This way if any thing happens before the build is complete I can build others. It should not be to complicated to implement. The reason for suggusting this is that I have been trying to install gnome and came across a few problems. I wanted to get as much installed as I can. So I would start one install and another parralel to that !! But, I had to be carefull which port I was installing sothat they would not block each other. If the ports whith the most depends where build first I could install more efficiently as the check is quicker esspecially with a package like gnome. regards Keith

1 0

gnome install fails
by McGarry Vince 20 Jul '07

20 Jul '07

Installing a new MacPorts and a new gnome distro on a PowerBook G4. After 10-12 hours the installation stopped with the following. Suggestions? Vince McGarry %---------- In file included from /opt/local/include/libbonobo-2.0/bonobo/bonobo- i18n.h:37, from /opt/local/include/libgnome-2.0/libgnome/gnome- i18n.h:41, from /opt/local/include/libgnome-2.0/libgnome/ libgnome.h:30, from /opt/local/include/libgnomeui-2.0/gnome.h:5, from gkbd-indicator-test.c:34: /opt/local/include/glib-2.0/glib/gi18n.h:30:1: error: "N_" redefined In file included from /opt/local/include/libgnome-2.0/libgnome/gnome- program.h:41, from /opt/local/include/libgnome-2.0/libgnome/ libgnome.h:29, from /opt/local/include/libgnomeui-2.0/gnome.h:5, from gkbd-indicator-test.c:34: /opt/local/include/popt.h:161:1: error: this is the location of the previous definition make[2]: *** [gkbd_indicator_test-gkbd-indicator-test.o] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Warning: the following items did not execute (for libgnomekbd): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing.

2 1

Installing Gnome and "Out of Memory" xml2po
by Keith J. Schultz 20 Jul '07

20 Jul '07

Hi Everybody, I have been trying to install Gnome for some time now and ran into the problem that in the port zenity and file-roller I would get the following error message: Making all in help if ! test -d bg/; then mkdir bg/; fi if [ -f "C/zenity.xml" ]; then d="../"; else d="/opt/local/var/ macports/build/ _opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_z enity/work/zenity-2.18.2/help/"; fi; \ (cd bg/ && \ `which xml2po` -e -p \ "${d}bg/bg.po" \ "${d}C/zenity.xml" > zenity.xml.tmp && \ cp zenity.xml.tmp zenity.xml && rm -f zenity.xml.tmp) Python(301) malloc: *** vm_allocate(size=1069056) failed (error code=3) Python(301) malloc: *** error: can't allocate region and Making all in help if ! test -d bg/; then mkdir bg/; fi if [ -f "C/file-roller.xml" ]; then d="../"; else d="/opt/local/var/ macports/build/ _opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_f ile-roller/work/file-roller-2.18.3/help/"; fi; \ (cd bg/ && \ `which xml2po` -e -p \ "${d}bg/bg.po" \ "${d}C/file-roller.xml" > file-roller.xml.tmp && \ cp file-roller.xml.tmp file-roller.xml && rm -f file- roller.xml.tmp) Python(8342) malloc: *** vm_allocate(size=1069056) failed (error code=3) Python(8342) malloc: *** error: can't allocate region Python(8342) malloc: *** set a breakpoint in szone_error to debug At first I thought it was xml2po or Python, but this is not the case !! As gnome-doc-utils installs correctly and xml2po and python work O.K. I can only assume that the problem is in the help files zenity.xml and file-roller.xml. The reason why a say this that after I modified the Makefile in .../work/<port>/help/ not to build the foreign language help files file-roller and zenity installed! I am not to xml savvy nor into this ports stuff could some look into it see what is going wrong. Maybe a bad config file or the xmls themselves !! I will try submitting a ticket next week. regards Keith.

1 0

tksourceview# does not recognizes gnome# - part 2
by olivier SAINT-EVE 20 Jul '07

20 Jul '07

The problem seems to have its origin in the compilation of gnome#. During this one, I have the following message: --- Configuration summary * Installation prefix = /opt/local * C# compiler: /opt/local/bin/mcs -define:GTK_SHARP_2_6 -define:GTK_SHARP_2_8 -define:GNOME_SHARP_2_16 Optional assemblies included in the build: * art-sharp.dll: yes * gnomevfs-sharp.dll: yes * gnome-sharp.dll: no * rsvg-sharp.dll: no * gtkhtml-sharp.dll: no * vte-sharp.dll: no NOTE: if any of the above say 'no' you may install the corresponding development packages for them, rerun autogen.sh to include them in the build. so we see that gnome-sharp is not installed. someone know what is the name of the feature for gnome-sharp (./configure has an option --enable-feature=yes), in the purpose of having gnome-sharp compiled ? thank you, lolveley.

1 0

gtksourceview# does not recognizes gnome#
by olivier SAINT-EVE 19 Jul '07

19 Jul '07

Hello, I send you some informations concerning my problem (which is the subject of this mail): -when I enter ./configure in the folder of the sources of gtksourceview#, I obtain: checking for GTK_SHARP... configure: error: Package requirements (gnome-sharp-2.0 >= 1.9.3) were not met: No package 'gnome-sharp-2.0' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GTK_SHARP_CFLAGS and GTK_SHARP_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. - so I went to /opt/local/lib/pkgconfig, and I found gnome-vfs-2.0.pc but not gnome-sharp-2.0.pc - I copied gnome-sharp-2.0.pc from the directory where I have unzipped the sources into /opt/local/lib/pkgconfig, and I saw that gtksourceview# said me he has found gnome-sharp( but there is an error of another file is not found, what is rather normal); the conclusion is that gtksourceview# attemps to find gnome-sharp-2.0.pc, but does not find it, this is gnome-sharp which is not properly installed - I downloaded the source of gnome-sharp from the site of go-mono.org, so I presume the version (2.16) is good - there must exist a way to compile better gnome-sharp (some options to enter?), but I haven't found it can you help me? lolveley.

1 0

webpublish ftp location is now wrong
by Malcolm Fitzgerald 19 Jul '07

19 Jul '07

I'm having a whale of time following an upgrade from 10.3 to 10.4. I used webpublish, a simple command line tool that transferred files to another computer. It's still listed in MacPorts but the location has changed. It was at ftp://ftp.gnu.org/gnu/webpublish but it is now at ftp://ftp.gnu.org/old-gnu/webpublish. Can I change the locations that will be searched, ie, change gnu to old-gnu. malcolm

2 2